It seems fine in dreamweaver, I don't see whats actually wrong with it, it seems perfect?

<p><strong>Manufacturer:

</strong><a

 title="Iwill" href="https://www.contentteller.com/www.iwill.com" target="_blank"><strong>Iwill

</strong></a>

<p></p>

<p><strong>Price:

£25-35</strong></p>

<p> <img

 src="https://www.contentteller.com//images/review/box.jpg"></p>

<p> Work loads are increasing,

stress is going up, you feel like pulling your hair out, you want to

release some stress, there are many stange ways to release stress, from

milking cow's, to bending your legs in the wrong way. However, instead

of dealing with the stress and computer's being one of the worst

sources, then you call for a stable workstation, this is where the

Iwill DN800 comes into play. </p>

<p><img

 src="https://www.contentteller.com//images/cable1.jpg"> <img

 src="https://www.contentteller.com//images/cable2.jpg"> <img

 src="https://www.contentteller.com//images/boxback.jpg"> </p>

<table bgcolor="#ffffff" border="1"

 bordercolor="#000000" cellspacing="0" width="415">

  <tbody>

    <tr>

      <td width="52"><strong>CPU

      </strong></td>

      <td width="347">2x

Xeon Socket 604 (800MHz FSB)</td>

    </tr>

    <tr>

      <td><strong>Memory</strong></td>

      <td>4x 184 pin DDR DIMM,

DDR266/333 8GB Max, ECC Registered</td>

    </tr>

    <tr>

      <td><strong>Display/Graphics</strong></td>

      <td>16 PCI Express </td>

    </tr>

    <tr>

      <td><strong>Audio</strong></td>

      <td>AC'97, 5.1 with Analog

Devices AD1980 codec controller</td>

    </tr>

    <tr>

      <td><strong>Power</strong></td>

      <td>EPS12V</td>

    </tr>

    <tr>

      <td><strong>Form

Factor</strong></td>

      <td>ATX (305mm X 267mm)</td>

    </tr>

    <tr>

      <td><strong>Networking</strong></td>

      <td>Intel 82541GI Gigabit

& Boardcom BCM5721 with PME over 2x RJ-45 interfaces </td>

    </tr>

    <tr>

      <td><strong>IDE</strong></td>

      <td>Dual ATA 133/100/66/33,

ATAPI IDE Device support </td>

    </tr>

    <tr>

    </tr>

  </tbody>

</table>

<p><strong>Input/Output</strong>

</p>

<p>2x PS/2 compliant Keyboard

& Mouse

1x 25 pin parrallel (ECP & EPP)

1x Intel 82541GI Gigabit & 1x Boardcom BCM5721 RJ-45

connectors.

1x UART 16550 (Serial)

2x USB 2.0 port

1x Red Green & Blue video port

1x Line in, out and Microphone in

1x floppy connector

4-pin CD-IN and Aux-In audio input connector </p>

<strong>BIOS</strong>

<p>AMI Flash protected BIOS<br>

multi boot<br>

ACPI S1/S3<br>

IDE device recognition + ASF 2.0 </p>

<p><strong>SATA</strong>

</p>

<p>2x serial -ATA (RAID 0/1)

Hot Swap </p>

<p><strong>Expansion</strong></p>

<p>1x PCI Express x16 slot <br>

1x PCI Express x4 slot<br>

2x PCI-X 64-bit/66 MHz slot<br>

1x PCI 32-bit / 33 MHz slots

</p>

<p><strong>Chipset</strong></p>

<p>Intel E7525 tip/chip set MCH

Intel Hance Rapids ICH

Winbond 83627 HF super I/O </p>

<p> <img

 src="https://www.contentteller.com//images/io.jpg"> <img

 src="https://www.contentteller.com//images/cable1.jpg"> </p>

<p><strong>CPU

</strong> </p>

<p></p>

<p>The motherboard utilizes two

Xeon CPU's hand in hand, the choice of work station processors that are

overly expensive with not much to boast about turns off the most

demanding customer. Pricing from £250 each per CPU is pocket

ripping and bank emptying put off, glutenous pricing comes into play

with all work station's, but is pretty much overkill, the board can

support's a 800MHz, which is the server family for email server's, web,

front-end etc. The acronym Work Station, can be confused, when it has

two meaning's in this sense, first of all, being server based work and

general high level use. Knocking the CPU usage is all good and well,

all though, the Xeon's are renouned for the 100% reliabillity, the

Xeon's are used in the infamous Blade server's as well. This point can

relieve stress from admin's and other's alike. The Xeon's go from 2.80

to 3.60 GHz so the power and price is upto you, the E7525 chip set

handles the Xeon a dream. Using an Xeon for Work station work, like

building spread sheets, or creating leaflets in publisher is a waste of

processes. </p>

<p><img

 src="https://www.contentteller.com//images/boxsockets.jpg"><img

 src="https://www.contentteller.com//images/sockets2.jpg"> <img

 src="https://www.contentteller.com//images/southbridge.jpg"><img

 src="https://www.contentteller.com//images/northbridge.jpg"><img

 src="https://www.contentteller.com//images/northbridgenaked.jpg"> </p>

<p><strong>Memory</strong></p>

<p> The board has 4 DIMMs, on the

normal 184 pin standard interface, the board can handle a double

checking 8 gigabytes of memory through the DIMMs, equaling 2 gig's per

DIMM. The board used registered ECC. The board can't handle PC3200,

which is 400MHz, why? Because the DN800 is focused on stabillity, over

PC2700 things start to get a bit on the rocky side.</p>

<p><strong>Audio

Sound</strong></p>

<p> Sound, sound, sound... sound.

Iwill's trademark is bringing the customer's more than they need, a

true build and quality. The DN800 is by no means an exception, the

Audio configuration is out standing, especially for included 5.1 audio,

Work station's and server's need to have sound, commonly this is over

looked, but if you are going to be having a server that is critically

controlling important things, you want to hear what is going on. 5.1

with AC'97 onboard is a brilliant plus, more soup than the doctor

ordered if you will. </p>

<p><strong>Optical

Interface</strong></p>

<p> As with all the latest

motheroards, there is SATA as well as on board IDE, the board has 2

SATA and 2 IDE headers. The IDE speed's are 133/100/66/33, with all

speed's on hand, ready for action. Another interesting feat is the SATA

header's there are 2 in total, capable of RAID 1 and 0 configuration,

RAID is used by mirroring up two drive's to work side by side, which is

a great plus, to many user's wanting to speed stuff up. Hard drive's

normally work slower than the processor's can handle, RAID

configuration's will boost the power back up to the normal speeds.</p>

<p><img

 src="https://www.contentteller.com//images/boxmemory.jpg"> <img

 src="https://www.contentteller.com//images/skew.jpg"><img

 src="https://www.contentteller.com//images/manual.jpg"><img

 src="https://www.contentteller.com//images/cek.jpg"> </p>

<p><strong>Networking

</strong></p>

<p>The Iwill DN800 is a good

networkable board, having 2 different types of network interfaces,

Intel 82541GI Gigabit & Boardcom BCM5721, Gigabit connectivity

is quite out standing, normally to get hold of something of this power

is extradonary, especially on board! The DN800 can handle data speeds

only possible by purchasing a an extra PCI expansion card. </p>

<p><strong>Expansion

</strong></p>

<p>The thing is, when you buy a

new motherboard you want it to be future proof. Buying countless

upgrades and extra parts. How does the DN800 shape up? 1x PCI Express

x16 slot (for graphic card) 1x PCI Express x4 slot 2x PCI-X 64-bit/66

MHz slot 1x PCI 32-bit / 33 MHz slots First and foremost, it has PCI-E,

it start's from 4x the generic output, which is quite good, then you

look at the crazy 16x multiplier, thats 16 x 2 rows of pins in length

for all of you in the know. </p>

<p><strong>Formation

</strong></p>

<p>The most outrageous part of

this motherboard is the form factor, you would most likely be expecting

WTX, the server standard, but no, Iwill put's the frightner's on us

again, I was quite amused by the fact it is ATX, so you can put it in

your pimped cases or a beige one, so choosing a case and PSU is no

trouble. However error's and distraught could arise when you realise

that the EPS12V PSU doesn't quite fit into a generic case. Chipset All

boards, are relied upon the most based around the chipset, is all good

having a board that own's the competition in extra's and peripheral's

onboard, the choice of the E7525 to support the Xeon's will power out a

P4 EE rapidly, but gaming is a no, the chipset is good, with lot's of

support for a wide range of product's and handles the board like a

Formula 1 car, in an application aspect, gaming is just a waste.

Managment Managing a server can be a pain, especially when there is

alot going on, especially when you have a server that is taking out

thousands of individual task's every second. The Winbond W83627HF

chipset has an inbuilt hardware monitoring system, especially when you

don't know when your hardware or software is dead, the utillity will

tell you and give you prompt's to fix the problem. Secondaly, the board

also has AC power failure support another managment fix, it studies the

alternating current for surges, power cut's and other power related

'injuries' that may occur. </p>

<p><strong>IPMI?</strong></p>

<p> What the hell is IPMI,

simple... IPMI stands for Intelligent Platform Management Interface, as

the name say's it is a highly technical software based utillity adopted

obviously by intel. It monitor's, hardware, such as temperature's, fan

speeds, electricity level's, which relieves the stress of messing

around if you have 50 server's, the utillity is also scalable, so it

can be spread across different platform's, an intelligent move from

Iwill. Agilent ARMA is optional as well, for any one who doesn't know

either about this, Agilent ARMA is an information mangment tool that

looks after information and stores it invisibly in size. The DN800

smerk's at the competiton with the added nescessities and greatly

desirable performance, people who have opted out for other

manufacturer's board;s will be sad to know their money has trickled

down the drain. </p>

<p><strong>PCI-E</strong>

</p>

<p><img

 src="https://www.contentteller.com//images/sideskew.jpg"> <img

 src="https://www.contentteller.com//images/slifront.jpg"> <img

 src="https://www.contentteller.com//images/sliback.jpg"> <img

 src="https://www.contentteller.com//images/boxpci-xx.jpg"> </p>

<p><strong>Testing</strong></p>

<table border="1"

 bordercolor="#000000" cellpadding="0" cellspacing="0">

  <tbody>

    <tr>

      <td class="xl24" width="150">Motherboard:

      </td>

      <td class="xl24" width="141">Iwill

DN800-SLI ( intel 7525 ) </td>

    </tr>

    <tr>

      <td class="xl24">CPU:

      </td>

      <td class="xl24">Intel

Xeon 3.4 GHz (L2 Cache=2048KB) </td>

    </tr>

    <tr>

      <td class="xl24">DRAM:

      </td>

      <td class="xl24">Unigen

256MB DDR2-400 ECC, REG *2 </td>

    </tr>

    <tr>

      <td class="xl24">HDD:

      </td>

      <td class="xl24">WD

250GB SATA </td>

    </tr>

    <tr>

      <td class="xl24">Graphics:

      </td>

      <td class="xl24">3D

Labs Wildcat Realizm 800 </td>

    </tr>

    <tr>

      <td class="xl24"></td>

      <td class="xl24">ELSA

GLADIAC P940U ( nVIDIA 6800 Ultra ) </td>

    </tr>

    <tr>

      <td class="xl24">Operating

System: </td>

      <td class="xl24">Windows

XP Professional with SP2 </td>

    </tr>

    <tr>

      <td class="xl24">Driver

Version: </td>

      <td class="xl24">3D

Labs Wildcat Realizm 800 Ver 4.5.671.0 </td>

    </tr>

    <tr>

      <td class="xl24"></td>

      <td class="xl24">ELSA

GLADIAC P940U Ver 6.6.9.3 </td>

    </tr>

    <tr>

      <td class="xl24"></td>

      <td class="xl24">ELSA

FireGL V3100 Ver6.14.10.6483 </td>

    </tr>

    <tr>

      <td class="xl24"></td>

      <td class="xl24">nVIDIA

Quadro FX1300 Ver6.6.9.3 </td>

    </tr>

    <tr>

      <td class="xl24">Resolution:

      </td>

      <td class="xl24">1024*768

32bit </td>

    </tr>

  </tbody>

</table>

<p><strong>3DMark

05</strong> </p>

<p>

<table border="1"

 bordercolor="#000000" cellpadding="0" cellspacing="0">

  <tbody>

    <tr>

      <td class="xl26" width="150">

      </td>

      <td class="xl26" width="141">Realizm

800 </td>

      <td class="xl26" width="141">6800Ultra

SLI </td>

      <td class="xl25" width="141">FireGL

V3100 </td>

      <td class="xl25" width="141">Quadro

FX1300 </td>

    </tr>

    <tr>

      <td class="xl27">Score

      </td>

      <td class="xl26">851 </td>

      <td class="xl26">7712

      </td>

      <td class="xl24">1152

      </td>

      <td class="xl24">901 </td>

    </tr>

  </tbody>

</table>

</p>

<p><strong>SPEC

Viewperf 8.01</strong> </p>

<p>

<table border="1"

 bordercolor="#000000" cellpadding="0" cellspacing="0">

  <tbody>

    <tr>

      <td class="xl25" width="150">

      </td>

      <td class="xl25" width="141">Realizm

800 </td>

      <td class="xl25" width="141">6800Ultra

SLI </td>

      <td class="xl24" width="141">FireGL

V3100 </td>

      <td class="xl24" width="141">Quadro

FX1300 </td>

    </tr>

    <tr>

      <td class="xl26">3dsmax-03

      </td>

      <td class="xl27">46.12

      </td>

      <td class="xl27">16.09

      </td>

      <td class="xl29">18.41

      </td>

      <td class="xl29">25.41

      </td>

    </tr>

    <tr>

      <td class="xl28" width="150">Catia-01

      </td>

      <td class="xl27">27.85

      </td>

      <td class="xl27">11.73

      </td>

      <td class="xl30">22.15

      </td>

      <td class="xl30">12.35

      </td>

    </tr>

    <tr>

      <td class="xl28" width="150">Ensight-01

      </td>

      <td class="xl27">28.20

      </td>

      <td class="xl27">13.30

      </td>

      <td class="xl30">14.13

      </td>

      <td class="xl30">10.30

      </td>

    </tr>

    <tr>

      <td class="xl28" width="150">Light-07

      </td>

      <td class="xl27">25.90

      </td>

      <td class="xl27">7.194

      </td>

      <td class="xl30">20.84

      </td>

      <td class="xl30">15.25

      </td>

    </tr>

    <tr>

      <td class="xl28" width="150">maya-01

      </td>

      <td class="xl27">53.90

      </td>

      <td class="xl27">17.95

      </td>

      <td class="xl30">33.67

      </td>

      <td class="xl30">28.42

      </td>

    </tr>

    <tr>

      <td class="xl28" width="150">proe-03

      </td>

      <td class="xl27">54.44

      </td>

      <td class="xl27">15.71

      </td>

      <td class="xl30">34.32

      </td>

      <td class="xl30">27.93

      </td>

    </tr>

    <tr>

      <td class="xl28" width="150">sw-01

      </td>

      <td class="xl27">34.84

      </td>

      <td class="xl27">13.84

      </td>

      <td class="xl30">14.62

      </td>

      <td class="xl30">12.15

      </td>

    </tr>

    <tr>

      <td class="xl28" width="150">ugs-04

      </td>

      <td class="xl25">42.18

      </td>

      <td class="xl25">5.319

      </td>

      <td class="xl30">14.99

      </td>

      <td class="xl30">15.79

      </td>

    </tr>

  </tbody>

</table>

</p>

<p><strong>Evans

& Sutherland Glaze V3.0</strong>

</p>

<p>

<table border="1"

 bordercolor="#000000" cellpadding="0" cellspacing="0">

  <tbody>

    <tr>

      <td class="xl26" width="150">

      </td>

      <td class="xl26" width="141">Realizm

800 </td>

      <td class="xl26" width="141">6800Ultra

SLI </td>

      <td class="xl25" width="141">FireGL

V3100 </td>

      <td class="xl25" width="141">Quadro

FX1300 </td>

    </tr>

    <tr>

      <td class="xl27"> </td>

      <td class="xl28">FPS/

CPU Utility Rate </td>

      <td class="xl28">FPS/

CPU Utility Rate </td>

      <td class="xl28">FPS/

CPU Utility Rate </td>

      <td class="xl28">FPS/

CPU Utility Rate </td>

    </tr>

    <tr>

      <td class="xl26">4

Lights </td>

      <td class="xl26">1417.2

/ 6% </td>

      <td class="xl24">60.4

/ 1% </td>

      <td class="xl24">164.8

/ 25% </td>

      <td class="xl24">60.4

/ 1% </td>

    </tr>

    <tr>

      <td class="xl26">8

Lights </td>

      <td class="xl26">1177.2

/ 6% </td>

      <td class="xl24">60.4

/ 1% </td>

      <td class="xl24">124.3

/ 25% </td>

      <td class="xl24">60.4

/ 1% </td>

    </tr>

    <tr>

      <td class="xl26">16

Lights </td>

      <td class="xl26">748.3

/ 6% </td>

      <td class="xl25">NS </td>

      <td class="xl25">NS </td>

      <td class="xl25">NS </td>

    </tr>

    <tr>

      <td class="xl26">32

Lights </td>

      <td class="xl26">377.6

/ 6% </td>

      <td class="xl25">NS </td>

      <td class="xl25">NS </td>

      <td class="xl25">NS </td>

    </tr>

  </tbody>

</table>

</p>

<p></p>

<p><strong>Conclusion</strong></p>

also, when I click on URL= the button on the news, its not a bug, but could I change it to automatically say "Read it" to save time?

<a href="https://www.contentteller.com/javascript:AutoInsert$var('[ url=http://www. .com ]My Homepage[ /url ]')"><img src="../images/icons/button_urllink.png" border="0"></a>